histoire de sel !
Modérateurs : Benoit de Bretagne, carlos, chloé
histoire de sel !
bonjours , voila j'ai lu dans un manuel de lutherie violon il y a longtemps,
qu'on peu appliquer un produit a base de sel de chez pas quoi ? a l'intérieur , ça doit'etre du carbonnate de magnésium ou autre truc dans se genre la , et je voudrais savoir a quoi ca sert ? si vous en savez plus sur ce sujet la preparation , le ou les produits utilisés a mélanger , les proportions , Merçi d'avance .
qu'on peu appliquer un produit a base de sel de chez pas quoi ? a l'intérieur , ça doit'etre du carbonnate de magnésium ou autre truc dans se genre la , et je voudrais savoir a quoi ca sert ? si vous en savez plus sur ce sujet la preparation , le ou les produits utilisés a mélanger , les proportions , Merçi d'avance .
Salut!
c'est peut-être du sel de bore, placé dans des instruments pour déloger des parasites/insectes xylophages dans l'instrument
voir http://www.onf-contrebasse.com/forum/topic763.html
c'est peut-être du sel de bore, placé dans des instruments pour déloger des parasites/insectes xylophages dans l'instrument
voir http://www.onf-contrebasse.com/forum/topic763.html
Dernière modification par Thoms le dim. 15 mars 2009, 20:58, modifié 1 fois.
Il y a aussi ce truc rapporté par Tom Blackshear (http://tguitars.home.texas.net/Fine%20t ... guitar.htm)
"I reasoned that if some of the old masters like Marcelo Barbero, and currently, Arcangel Fernandez, would adjust the fan braces inside the guitar with a wet finger dabbed in salt, then there must be a way to emulate their work to achieve a fine voice. My idea about the salt trick is that the moisture from the finger actually goes into the strut and the salt extracts the moisture....therefore, very little moisture should be used. I've actually used this technique to quiet down the metallic edge to the sound when the fan braces are a little on the thin side."
A prendre avec un grain de sel mais j'adore ces légendes
Xavier
"I reasoned that if some of the old masters like Marcelo Barbero, and currently, Arcangel Fernandez, would adjust the fan braces inside the guitar with a wet finger dabbed in salt, then there must be a way to emulate their work to achieve a fine voice. My idea about the salt trick is that the moisture from the finger actually goes into the strut and the salt extracts the moisture....therefore, very little moisture should be used. I've actually used this technique to quiet down the metallic edge to the sound when the fan braces are a little on the thin side."
A prendre avec un grain de sel mais j'adore ces légendes
Xavier
Il y a aussi ce truc rapporté par Tom Blackshear (http://tguitars.home.texas.net/Fine%20t ... guitar.htm)
"I reasoned that if some of the old masters like Marcelo Barbero, and currently, Arcangel Fernandez, would adjust the fan braces inside the guitar with a wet finger dabbed in salt, then there must be a way to emulate their work to achieve a fine voice. My idea about the salt trick is that the moisture from the finger actually goes into the strut and the salt extracts the moisture....therefore, very little moisture should be used. I've actually used this technique to quiet down the metallic edge to the sound when the fan braces are a little on the thin side."
A prendre avec un grain de sel mais j'adore ces légendes
Xavier
"I reasoned that if some of the old masters like Marcelo Barbero, and currently, Arcangel Fernandez, would adjust the fan braces inside the guitar with a wet finger dabbed in salt, then there must be a way to emulate their work to achieve a fine voice. My idea about the salt trick is that the moisture from the finger actually goes into the strut and the salt extracts the moisture....therefore, very little moisture should be used. I've actually used this technique to quiet down the metallic edge to the sound when the fan braces are a little on the thin side."
A prendre avec un grain de sel mais j'adore ces légendes
Xavier
- Benoit de Bretagne
- Messages : 13459
- Inscription : lun. 03 avr. 2006, 18:49
- Localisation : Bernieulles Pas de Calais
- Contact :