bonjours , voila j'ai lu dans un manuel de lutherie violon il y a longtemps,
qu'on peu appliquer un produit a base de sel de chez pas quoi ? a l'intérieur , ça doit'etre du carbonnate de magnésium ou autre truc dans se genre la , et je voudrais savoir a quoi ca sert ? si vous en savez plus sur ce sujet la preparation , le ou les produits utilisés a mélanger , les proportions , Merçi d'avance .
J'ai un paquet de sel de bore sur l'étiquette ils expliquent qu'il n'est efficace que si on l'étale sur la surface. ça ne dégage pas d'odeur ou autre. Donc en gros il faudrait badigeonner sa guitare de sel ! Sans moi merci
Remarque ça peut servir si l'épicéa vient de Tchernobyl.
"I reasoned that if some of the old masters like Marcelo Barbero, and currently, Arcangel Fernandez, would adjust the fan braces inside the guitar with a wet finger dabbed in salt, then there must be a way to emulate their work to achieve a fine voice. My idea about the salt trick is that the moisture from the finger actually goes into the strut and the salt extracts the moisture....therefore, very little moisture should be used. I've actually used this technique to quiet down the metallic edge to the sound when the fan braces are a little on the thin side."
A prendre avec un grain de sel mais j'adore ces légendes
"I reasoned that if some of the old masters like Marcelo Barbero, and currently, Arcangel Fernandez, would adjust the fan braces inside the guitar with a wet finger dabbed in salt, then there must be a way to emulate their work to achieve a fine voice. My idea about the salt trick is that the moisture from the finger actually goes into the strut and the salt extracts the moisture....therefore, very little moisture should be used. I've actually used this technique to quiet down the metallic edge to the sound when the fan braces are a little on the thin side."
A prendre avec un grain de sel mais j'adore ces légendes